Reflectix Insulation in Bloomington, CA | Rock Solid Insulation
Reflectix radiant barrier service in Bloomington comes down to one thing most contractors miss: the foil only pays off when it’s part of a whole-attic system, not a standalone fix. We’re Rock Solid Insulation, and we install, repair, and replace Reflectix across Bloomington with blown-in insulation and ventilation prep built into the same job. Call (855) 798-0822 for a free estimate on Reflectix work in the 92316 zip code.
We handle genuine Reflectix sales & service with full product-line knowledge, from Double Reflective rolls to roof deck panels. Ruben Calloway, our owner, learned building science at Chaffey College before spending over a decade installing radiant barriers, blown-in fiberglass, and spray foam across the Inland Empire. That background matters when a Bloomington attic is cooking at 148°F and the foil facing is delaminating.
Why Bloomington Residents Choose Us for Reflectix Service
Most insulation crews treat Reflectix as a roll of shiny stuff you staple to rafters. We don’t. We’ve retrofitted radiant barriers into dozens of Bloomington attics, from 1950s tract homes near Cedar Avenue to newer stucco builds south of the 10, and we know how the foil facing performs under Inland Empire heat cycling. The material either performs or it doesn’t, and everything else is just sales talk.
Our crew carries genuine Reflectix product and manufacturer-approved tape and staples on the truck. We’re an independent provider, not a Reflectix-authorized dealer, which means we recommend what your attic actually needs. Sometimes that’s a new Reflectix layer with a proper air gap. Sometimes it’s removing failed foil and starting with blown-in R-38 plus ventilation baffles. Either way, you get one contractor who knows the product and the local conditions in Bloomington service area without calling in three different specialists. Ruben grew up in Ontario’s Sultana neighborhood, so he treats summer heat seriously. He’s spent enough July afternoons standing in San Bernardino County sun to take attic temperature readings personally.
Common Reflectix Insulation Problems We Solve in Bloomington
- Foil delamination and bubbling. After years of 140 – 150°F attic cycling, the foil facing starts peeling away from the bubble core, especially when the original install was stapled tight against the roof sheathing with no air gap. We see this constantly in Bloomington’s older tract homes.
- Dust and soot accumulation on the reflective surface. Bloomington’s dry, dusty air settles on foil facing in attics that haven’t been sealed. The layer of grime cuts emissivity and turns a radiant barrier into a dull heat absorber. We test surface reflectivity before recommending repair or replacement.
- Moisture trapping over settled fiberglass. When Reflectix gets installed over damp or compressed fiberglass without a proper vapor path, condensation forms on the foil underside and further compacts the insulation below it. In a climate with cool winter nights, this shows up as damp spots and reduced R-value.
- Rodent and foot traffic damage. Rats and HVAC techs both tear through bubble layers. We find ripped foil, gaping holes, and crushed bubble core in attics that have seen decades of service calls and pest activity.
- Improper original installation with no air gap. Reflectix needs space to reflect. Installed tight against sheathing or draped directly over old insulation, it acts as a mediocre conductor instead of a radiant barrier. We fix the install so the product actually does its job.
Reflectix Service in Bloomington: What Local Conditions Mean for Your Equipment
Bloomington’s older tract homes often have attics with only a few inches of settled, compacted fiberglass, or none at all, and no radiant barrier. On a July afternoon, those attic spaces reliably hit 140 – 150°F. That’s a specific Bloomington problem because the city’s housing stock skews heavily toward 1950s – 1970s wood-frame construction with stucco exteriors and original single-pane windows. Any Reflectix install here has to be paired with a top-up and ventilation prep, not sold as a stand-alone foil.
Last July we got called to a 1960s stucco ranch near Bloomington’s Cedar Avenue area. The attic was reading 148°F and the homeowner’s cooling bill had doubled. The existing Reflectix foil had delaminated from the roof deck and was covered in dust. We removed it, air-sealed the top plates, blew in R-38 fiberglass, and installed a new Reflectix radiant barrier with a ¾-inch air gap and ridge-vent baffles. Attic temp dropped to 118°F by the next heat wave, and the homeowner reported a noticeable drop in afternoon AC runtime. That’s the sequence that works here, and it’s the same one we recommend for any Reflectix service in Fontana or Bloomington.
Reflectix Models & Products We Service in Bloomington
We install and repair the full Reflectix residential line. Double Reflective Insulation Roll, the foil-bubble-foil product most Bloomington homeowners know, goes in as a roof-deck radiant barrier or crawl-space liner. Single-sided Reflective Foil Insulation works for specific wall and duct applications. Radiant Barrier Roof Deck Panels are a go-to when the existing deck needs a clean, rigid install surface. We also carry the Reflectix Insulation Staples and Tape Kit on every job so seams and edges hold up through Bloomington’s heat cycles.
On parts, we use genuine Reflectix rolls and manufacturer-approved materials. But we stay practical about repair versus replace. If more than a third of your existing barrier is torn, delaminated, or dust-caked, a new Reflectix layer usually pays back faster than patchwork. We’ll show you the math before you commit to anything.
Reflectix Service Pricing in Bloomington
What you pay for Reflectix service in Glen Avon or Bloomington depends on attic size, access difficulty, and whether we’re adding blown-in insulation or ventilation work at the same time. A basic radiant barrier install for a typical 1,200-square-foot attic runs between $900 and $1,800. Full removal of failed foil plus new Reflectix barrier, air sealing, top-up insulation, and vent baffles typically falls in the $2,800 to $5,500 range. Jobs that require venting corrections or dealing with rodent damage run higher.
Every quote includes a full attic inspection, surface temperature readings, and a written scope of work. Call (855) 798-0822 and we’ll come out, take measurements, and give you a number you can plan around. Estimates are free and there’s no pressure.
Serving Bloomington, CA — Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Reflectix Insulation in Bloomington
Rarely, and we’ll tell you that before you spend a dollar. Reflectix needs an air gap, a clean surface, and existing insulation below it to deliver meaningful savings in Bloomington’s climate. Installed alone over an under-insulated attic, the foil can’t compensate for the missing R-value. Most homes here need the barrier plus blown-in insulation plus ventilation to see real drops in afternoon AC runtime. Call (855) 798-0822 for an attic check and we’ll tell you what your home actually needs.
Look for foil that’s peeling or bubbled away from the bubble core, visible dust buildup on the reflective surface, torn sections, or signs of moisture staining. If your attic feels hotter than the outside air on a summer afternoon, or if rooms directly below the attic are consistently warmer than the rest of the house, the barrier probably isn’t reflecting anymore. We diagnose this with surface temperature readings before recommending Reflectix repair in Rialto or replacement.
Yes. Reflectix requires a minimum ¾-inch air space on at least one side of the foil to function as a radiant barrier. In Bloomington attics, we install it with that gap maintained against the roof deck or truss chords. Tight stapling against sheathing kills the product’s performance and accelerates delamination under summer heat.
It can, but only after the existing insulation is inspected for moisture and compaction. We never lay foil directly over damp or flattened fiberglass because condensation on the foil underside will compress the insulation further. If the existing material is dry and adequate, we’ll install Reflectix as a facing layer with the required air gap. If it’s shot, we top up or replace first.
Yes, but only as part of a package. A 1950s Bloomington tract home with bare rafters and no insulation will not be fixed by Reflectix alone. The right sequence is blown-in fiberglass to R-38, air sealing at top plates, vent baffles at the eaves, and then a Reflectix repair in Pedley or new radiant barrier with a proper air gap. That combination is what actually drops attic temps from 140°F down to something your AC can handle. Call (855) 798-0822 for a free attic assessment and exact pricing.
Service Areas Near Bloomington
We run Reflectix service through Bloomington and the surrounding Inland Empire. Our trucks cover Fontana, Rialto, Colton, and San Bernardino, plus Reflectix service in Rubidoux and Reflectix service in Home Gardens. If you’re in any of these areas with a hot attic and failing foil, same crew, same method, same straight answers.
Book Your Reflectix Service in Bloomington Today
We keep Bloomington appointments moving fast, and same-day estimates are available when we’re already running jobs in the area. Call (855) 798-0822 and tell us what your attic is doing. We’ll show up, take measurements and surface temps, and lay out your options without the sales routine.
Written by Ruben Calloway, Owner at Rock Solid Insulation, serving Bloomington and the Inland Empire with independent Reflectix service and whole-attic insulation solutions.